DEKO GJ52 magnet
Familiar situations happen with many repairmen when the necessary fastening screw cannot be fixed and secured in the place intended for it. Worse, it constantly falls out and falls into the narrowest parts of the structure, from where it is sometimes very difficult to get it.
On the other hand, there may be cases when the screwdriver is magnetized from the surrounding devices and attracts all the necessary and unnecessary small parts. Especially for these two situations, opposite in effect, DEKO offers an original product that allows you to demagnetize and magnetize the screwdrivers and parts used during installation.
Description of the product and its capabilities
The device is distinguished by its compact dimensions (3×4 cm) and low weight, which does not exceed an average of 70 grams. In its upper part there is a hole marked on the side with a minus sign, which is responsible for demagnetizing the screwdrivers. The lower window with the “plus” symbol next to it serves as a magnetizing element.
Users note that with the help of this device it is possible to work not only with small screws and the same screws. Many of them experimented with different types of screwdrivers (size and tip material) and with different sizes of hardware. The task in these tests was simple and was formulated as follows: to determine the maximum size of fasteners that a screwdriver magnetized with the help of “DEKO GJ52” can hold.
The results of the experiments revealed the following:
- the maximum size of the hardware held by weight corresponds to an M3 screw (the M4 screw no longer holds at the end and falls off due to its own weight);
- if the screwdriver has factory magnetization, then after exposure to “DEKO GJ52” it starts to hold M4 hardware;
- a simple instrument demagnetizes well, but a factory-magnetized sample cannot be completely neutralized.
The overall impression of the product presented on “Aliexpress” is excellent. With its help, it is possible to increase the efficiency of the simplest assembly operations with screwdrivers of various types.
Characteristics, advantages and scope
The product offered by the service is distinguished by one hundred percent brand novelty and has the following performance characteristics:
- Device dimensions: 52x50x28 mm.
- Product weight without packaging: 70 grams.
- The mode of action is autonomous (it does not require batteries or other electrical power sources).
The main advantages of the device “DEKO GJ52” are manifested in ease of use, low cost and versatility (the possibility of using any type of metal screwdrivers).
And the scope of its application is considered to be installation operations, during which there is a need to keep small hardware or, conversely, to demagnetize the tip of steel screwdrivers.