DEKO DKSS02 electric jigsaw
Electric jigsaws are very common among lovers of cutting wood and other materials at hand. Their popularity is due to the following attractive properties:
- The lightness of the device itself.
- Its versatility.
- Convenience of work when sawing products from various materials.
This tool is most suitable for working with wood and its derivatives, such as, in particular, plywood or plywood, chipboard, OSB, fiberboard and MDF. With it, you can make neat smooth curves and circular cuts almost without tearing!
For home craftsmen who are engaged in cutting workpieces from wood, plastic or metal, the site “Aliexpress” offers a wonderful tool. This is an electric jigsaw “DEKO DKSS02”, a powerful and light tool, which is not only comfortable to work with, but also pleasant. It is also suitable for cutting mineral fibers, ceramics and non-ferrous metals.
Product functionality and completeness
On the working panel of the electric jigsaw there are:
- Cutting start button.
- Interlocking switch.
- Dust collector assembly and heat dissipation device.
The lock button is used in a situation where it is necessary to protect against accidental switching on of the tool. The dust container provides a comfortable working environment for the user, protecting his lungs from the smallest dust particles. The radiator (heat sink) protects the engine from excessive overheating.
The electric jigsaw kit includes:
- spare blade;
- a hex wrench required to adjust the thrust base by turning it 45 degrees to the right or left;
- user guide.
Some models add an optional dust filter and carbon brush set to this set.
Specifications and additional features
The main characteristics of the cutting device are given below:
- The supply voltage in the electrical network is 220-240 Volts (at a current frequency of 50 Hz).
- The power consumption from the network, declared by the manufacturer, is 350 watts.
- The number of handles is 1 piece.
- Cutting speed at medium load – depending on model.
- The maximum thickness of the cut workpieces (for wood) is 55 mm.
- The same figure for metal and ceramics is 6 mm.
- Weight – 1.4 kg.
We add to this that a key is not required to clamp the working blade in the holding mechanism (it is made in a quick-release version).
When replacing a broken or worn-out file, it is simply fired, and a new one is installed in its place. The product also has a special platform that provides reliable support on the workpiece during operation. If desired, it can be deflected in both directions (left or right) at an angle of about 45 degrees. To do this, simply loosen the two mounting bolts using the supplied hex key, then turn in the desired direction and fix in a new position.